Biomass Furnace BB-18 Non-auto Ash Discharge BB-18 Auto Ash Discharge
Biomass Fuel Paddy husk¡EPressed straw bricks¡ECorn cob¡E
Coconut shell¡EWood chip¡ECoffee hull
Paddy husk
Dimension(mm) 3521×2048×4885 3521×2795×6002
Net weight(kg) 3420 4150
Max.Thermal Energy(kcal/hr) 180,000 (approx.)
Husk Consumption(kg/hr) 12~76 Maximum combustion(approx.)
Exhauster ash(kg/hr) 2.4~15.12 Maximum combustion(approx.)
Consumption of
Pressed straw bricks(kg/hr)
67 Maximum combustion(approx.) -
Wood Consumption(kg/hr) 10~70(approx) -
Annual diesel saving (Approx.) 60,000 liter/120days / 136,000 liter/270days
Automatic ash discharge system(Optional,for husk)kW(HP) - 0.2 (1/4)
Husk feeder(Optional,for husk and coffee hull) kW(HP) - 0.6 (3/4) 0.6 (3/4)
Power Consumption kW(HP) 4.5(6) 5.1 (6 3/4) 5.3 (7)
Safety Devices Thermo relay, Overheat sensor, Control Fuse Thermo relay, Overheat sensor, Control Fuse, Furnace pressure meter
Model SUPER-120B SUPER-240B
SUPER-300B
MD-150B MD-165B
Capacity
(kg)
Paddy 2800~12000 4000~24000 4000~30000 5700~12000 5700~13200
Corn 3450~14760 5000~29500 5000~36900 - -
wheat 3400~14550 5000~29100 5000~36400 6900~14700 6900~16200
Dimension Length (mm) 4089 4999 5832
Width (mm) 2660 3786 2783
Height (mm) 9602 10407 11629 9661 10272
Net weight(kg) 2460 4900 5200 3303 3398
Power Consumption kW(HP) 7.75(10.33) 16.75(22.6) 14.75(19.7)
Electricity 3 Phase, 220V/380V/415V/440V, 50Hz/60Hz
Temp. increase range
(for single unit)ambient temp.(Paddy)
+10~ 54¢J +10~ 28¢J +10~ 32¢J
Function
(Paddy)
(approx)
Loading (min) 60 58 65 60 66
Discharging (min) 58 58 70 58 65
Drying Rate(% / hr ) 0.5~1.0 0.5~1.0 0.4~0.7 0.7~1.2
Safety devices Thermo relay, Air pressure switch, Full load Buzzer, Timer, Control Fuse

¡°Specifications subject to change without notice.
¡°MD-150/165BB is applied for drying paddy and wheat seed only.
¡°BB-18 husk type can collect falling ash and discharge ash automatically – only for burning paddy husk.
¡°Thermal energy and husk consumption listed are for reference only. Actual data will differ from variety,
moisture content and impurity rate.
¡°Conditions of pressed straw bricks: 1.Moisture content : less than 13% 2.Thermal energy: 3700~4200 kcal/kg.
3.Dust content : as low as possible.
¡°Listed parameters and drying rate are for reference only and in accordance to grain with initial and target moisture content as following: Paddy: 26% to 15%,Actual value varies in correlation to ambient temperature, relative humidity, grain variety, hot air temperature, moisture content before and after drying.